ShredderFD 8904CC Cross-CutOPERATOR/MAINTENANCE MANUAL9/2013
Control PanelStart-up and OperationMain SwitchMODE/FULL/OPEN INDICATORSLED DisplaysLights signify mode (Auto/Manual/Stop/Reverse) and indicate when bi
8Operation1. Set main switch to ON (page 7). Turn the Key OFF/ON toggle switch on the control panel to the ON position. 2. Press the START button. The
Emptying the Waste BinShredded paper and particles accumulate in the shredder waste bin during normal operation. When the “Waste Bin Full” lamp light
10• Cleaning the Conveyor Belt Tensioning Station The tensioning station must be cleaned once a month, or as needed to maintain optimal performance.
11Exterior cleaning• Turn shredder off and unplug from wall outlet.• Wipe the exterior surfaces with a soft cloth. If the surfaces are very dirty, use
12PARTS LISTSITEM PART # DESCRIPTION QTY1 8904-TOP-01 TOP CASE 12 8904-TOP-02 LOADING TABLE 13 8904-TOP-03 UPPER FRAME (LEFT, RIGHT) 1 ea4 8902-CON-0
ITEM PART # DESCRIPTION QTY1 8904-BOD-04 UPPER SIDE CASE, LEFT 12 8904-BOD-06 LOWER SIDE CASE, LEFT 13 8902-TOP-07 CUTTING HEAD ACCESS DOOR 14 8802-PC
ITEM PART # DESCRIPTION QTY1 FD 8904-25 WASTE BIN - DUAL COMPARTMENT 12 8902-WST-03 WASTE BIN CASTERS 43 8000-97 NYLON WASTE BIN BAGS 24 8904-WST-08 W
14ITEM PART # DESCRIPTION QTY1 8902-WST-01 WASTE BIN 12 8902-WST-02 WASTE BIN DOOR LATCHES 23 8902-WST-03 WASTE BIN CASTERS 44 8000-95 NYLON WASTE BIN
15ITEM PART # DESCRIPTION QTY1 8902-CTB-02 SIDE PLATE, RIGHT 12 8902-CTB-01 SIDE PLATE, LEFT 13 8902-CTB-07 LONG SHAFT 14 8902-GEA-01 GEAR 15 8902-SPR
The machine number is specied on the nameplate on the shredder, shown above. Guarantee claims and inquiries cannot be processed if you do not quote t
16ITEM PART # DESCRIPTION QTY1 8902-MOT-01 MOTOR (22OV, 60Hz, 10HP) 12 8902-CTB-20 WASTE GUIDE, REAR 13 8902-CTB-21 MICRO SWITCH, WASTE BIN FULL SENSO
ITEM PART # DESCRIPTION QTY1 8902-PCB-23 CONTROL PANEL 12 8902-PCB-24 EMERGENCY STOP BUTTON 13 8902-PCB-25 KEY 24 8902-PCB-12 CONTROL PANEL PCB 15 890
ITEM PART # DESCRIPTION QTY1 8902-PCB-08 MICRO SWITCH, WASTE BIN FULL 12 8902-CTB-20 WASTE GUIDE, REAR 13 8902-CTB-06 WASTE GUIDE, LEFT & RIGHT 1
19ITEM PART # DESCRIPTION QTY1 8902-OIL-20 OIL NOZZLE, 10 PIECE 22 8902-OIL-21 OIL NOZZLE, 5 PIECE 13 8902-OIL-23 OIL NOZZLE BRACKET 14 8902-OIL-24 OI
OPTIONAL 8900-10 CONVEYORITEM PART # DESCRIPTION QTY1 8900-CB-01 CONVEYOR SIDE, LEFT 12 8900-CB-02 COVER 13 8900-CB-03 HOPPER 14 8900-CB-04 BODY CASE
ITEM PART # DESCRIPTION QTY1 8900-CB-11 CONTROLLER 12 8900-CB-12 HARNESS CABLE 13 8900-CB-13 MOTOR 132121
ITEM PART # DESCRIPTION QTY1 8900-CB-14 CONVEYOR TENSION BOLT 22 8900-CB-15 CONVEYOR POST 13 8900-CB-16 WASTE PLATE 14 8900-CB-17 WASTE PLATE HANDLE 1
ITEM PART # DESCRIPTION QTY1 8900-CB-18 STOPPER 12 8900-CB-19 GUIDE, RIGHT 13 8900-CB-20 CONVEYOR BELT 14 8900-CB-21 GUIDE, LEFT 15 8900-CB-22-1 DOOR
TABLE OF CONTENTSTOPIC PAGESafety Precautions 1-2Checking Safety Devices 3Overview 4Machine Characteristics 5Cutting Data, Speed, Dimensions, Weight 5
“Work safety” symbol This symbol marks all work safety notes in this manual which can endanger t
2The FD 8904CC shredder is intended for shredding paper, cardboard, archive les, tapes, ribbons, CDs and magnetic disks. The hardened, solid-steel cu
Checking the safety devices Check the safety devices: • at the start of each work shift (when operation is sporadic)
General OverviewFront ViewControl PanelFeed TableSafety BarLeft Side View withElectricity Control Box Access Door4Breaker PanelWaste Bin Access DoorCo
5Machine characteristics Machine designation: FD 8904CCMachine type: conveyor-belt paper shredderTotal machine weight: 1,984 lbs. Technical equipment:
6InstallationSpace requirements for operation and maintenanceLeft Side View28 1/2”47”81”
Comments to this Manuals