OPERATOR MANUAL FIRST EDITION10/2012AutoSeal®FD 2002/FD 2032FE 2002/FE 2032
OPERATION1. Place power switch in the “ON” position.2. After determining the fold type (see pg 6 “Determining Fold Type”) set the Upper and Lower fold
Fig. 10Skew Adjuster7Fig. 9In-feed Tray Lever5. Set the paper side guides for the forms being used and lock in position (Fig 8a).Place a form between
8DETERMINING FOLD TYPETwo Standard Folds 11” “Z” & 11” “C” 11” “Z” Fold11” “C” FoldLeading glue edgeLeading glue edge11” “Z” Fold11” “C” FoldGlueG
9SETTING CUSTOM FOLDSExample 1: Uneven “Z”1. Measure the length of panel “A”2. Adjust the upper fold plate so that the fold stop lines up with the me
10OPERATOR MAINTENANCE1. It is recommended to let forms cool for one-half hour, from the laser printer, before folding. This allows toner to set on
11CLEARING PAPER JAMS:WARNING: Turn off machine and unplug cord from its receptacle1. If a jam occurs between the metal rollers remove any remaining f
TROUBLE-SHOOTINGTROUBLE POSSIBLE CAUSE REMEDYControl panel lights are not illuminated.No power at the wall outlet.No power to the machine inlet.No pow
TABLE OF CONTENTSSUBJECT PAGEDESCRIPTION 1SPECIFICATIONS 1UNPACKING 2 2000/2032 Components 2 Optional Conveyor Components 2CONTROL PANELS 3SE
DESCRIPTION1SPECIFICATIONSSpeed 2002 / 2032: Standard Mode: Up to 8,000 / 11,000 per hour, depending on fold typeHopper Capacity 2002 / 2032: Up to
2UNPACKING1.Check package for shipping damage. If there is shipping damage, do not discard the box.2.Remove the machine and packed components from the
No. NAME FUNCTION1 Start Button Press to start2 Stop / Reset ButtonPress to stop / Press to clear “fault” light3 Jog Button Allows one form to feed
4Fig. 1bLocating PinsFig. 1aLocating PinsUpper Fold Plate PinsSETUPInstalling Upper and Lower Fold Plates, and Power Cord1. Be sure the plate sets rm
Installing Optional Conveyor1. Assemble the conveyor. Attach the extension tray to the end of the conveyor using the three extension tray screws (Fig
Comments to this Manuals